Villager VLP 1610, Manual, Page: 25 / 137

9
Notice: FOUCTION FOR THREE PICTURES
A.4-1: Only Hammer
A.4-2: Hammer & drill
A.4-3: Spindle Lock
Auxiliary handle
Operate your machine only with the auxiliary handle 6. The auxiliary handle 6 can be set to
any position for a secure and low-fatigue working posture.
– Turn the bottom part of the auxiliary handle 6 in counterclockwise direction and swivel
the auxiliary handle 6 to the desired position. Then retighten the bottom part of the
auxiliary handle 6 by turning in clockwise direction.
Changing the tool (SDS-MAX)
Inserting tools
Clean and lightly grease tool shank before inserting (A2). Hold the rotary hammer with one
hand facing away from you. Grip and pull back the fastening sleeve and insert the SDS
tool. Push inward until a resistance is felt. Once you are satisfied it has seated release the
black
fastening sleeve. This should lock the chuck into position. The tool shank locks in
position automatically. Pull the tool to check if it is locked correctly.