Villager VLP 1610, Manual, Page: 24 / 137

8
APPLICATIONS
The machine is intended for hammer drilling in concrete, brick and stone as well as for
light chiseling work. Other uses for the tool will lead to the damage of the tool and a series
of dangers to the operator. Please note that our equipment has not been designed for use
in commercial, trade or industrial applications.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms to the power requirements specified
on the product nameplate.
2. Power switch
Ensure that the power switch in the OFF position. If the plug is connected to a power
receptacle while the power tool is ON
– it starts operating immediately, inviting serious
accident.
NOTICE: A.3-1 (8) picture On-Off switch, When the A.3-2(9) indicator light show the power
tools connected to the power, can start work. A.3-2(10) variable speed can control the
hammer and drill speed.
3. Mounting a tool
Note: When handling bull point, cold chisel and other accessories, standard tools are
recommended for better operation.
Safety Clutch
The safety clutch is activated if the drill becomes jammed or caught. This prevents the
machine from being wrenched from
the operator’s hand.