Villager VLP 1610, Manual, Page: 21 / 137

5
SAFETY WARNINGS FOR DRILL
a) When using electric hammer chisel only use bits that are configured with the correct
slots for this chuck).
b) MAKE SURE the spindle has come to a complete stop before touching the chuck or
attempting to change the chisel bit also beware that the bit will be hot, let it cool down
before changing as it could burn and cause injury.
c) ALWAYS MAKE SURE THE CHISEL IS FIRMLY SEATED IN THE CHUCK before starting
the job in hand.
DESCRIPTION OF SYMBOLS
Pay attention to all the signs and symbols shown in these instructions and on your tool.
Make a note of these signs and symbols. If you interpret the signs and symbols correctly,
your work with the machine will be safer and better.
Please this read the manual before the start-up
Wear safety footwear
Wear work gloves
Use hearing protectors
Use safety goggles
Wear a hardhat
Wearing respiratory protection is advised
Protection class II / Double insulation
Serbian conformity mark