Viking VDSC530 Series, Service Manual

Page: 18 / 132

© 2011 Viking Preferred Service
18
Operation
Settings and Functions–30" Oven
The main Controller governs all oven operations as
well as timing and meat probe functions.
There are two digital displays, one on each side of
the control knob and program buttons.
Left Display Window
The left display windows
indicates the following:
Ê UÊ/ˆ“iʜvÊ>Þ
Ê UÊ-̜«Ê/ˆ“i
Ê UʜœŽÊ/ˆ“iÊ
Ê UÊʈ˜ÕÌiÊ̈“iÀ
countdown
Clock, Time Function and Temp Probe Display
When AC power is applied (including after a power
loss), the CLOCK display defaults to a flashing
“12:00” and the word SET is displayed above the
flashing display and begins the incremental time.
Set the time as shown on page 19. When in any
TIME programming mode, if a display indictor is
flashing, pressing the “CLEAR/ SETTINGS” button
will cancel the program and revert the display to
the default setting (TIME OF DAY). Once a program
has started, the CLEAR function is deactivated and
the “OFF” button must be depressed to cancel a
timed program.
Once set, the current time will be displayed.
Depressing the “OFF” button will extinguish
the display. Though the display is OFF, the clock
function is operating.
Display Time of Day
If the display is off, depressing the “OVEN FUNC”,
“OVEN TEMP”, “OFF” or “CLEAR/SETTINGS”
buttons will activate the display and show the current
time of day. Depressing the “CLOCK/PROBE” button
will activate the display and allow adjustments to the
current time of day.
Depressing the “MIN/SEC TIMER”, “COOK
TIME”, and “STOP TIME” buttons will activate the
display and allow time function programming. If
you depress the “OFF” button once while in any
of these modes, the TIME OF DAY will display.
Depressing a second time will extinguish the display.
Right Display Window
The right display window
indicates the following:
Ê UÊʜœŽˆ˜}ʜ`iÊ-iiV̈œ˜
Ê UÊ*Ài i>ÌÊ/i“«iÀ>ÌÕÀi
Ê UÊ-iiVÌi`Ê/i“«iÀ>ÌÕÀi
Temperature And Oven Function
Temperature settings range from 150°F (55.5°C) –
550°F (287.8°C). Each increase/decrease is in 5ºF
(2ºC) increments.
Temperature Display
Actual Temp (PREHEAT only): 1ºF (1ºC) increments
Meat Probe Actual Temp: 1ºF (1ºC) increments
Set Temp (all other cycles): 5ºF (2ºC) increments
Note: PREHEAT and Meat Probe are the only cycles
where actual temperature is displayed. Otherwise
display shows only set temperature.
Left Display
Time and Probe Functions
Right Display
(Oven and Temperature Functions)
8 Program Buttons
(Oven and Time Functions)
Control /Selector Knob
Control Operation–Electronic Control
The following is the basic layout of the buttons, displays and how they are referenced below.