© 2011 Viking Preferred Service
107
Service Diagnostics and Procedures
Door Removal
1.
Open door completely. Place pins, supplied
with unit, in pinhole. For personal safety,
ONLY use pins supplied with the unit.
2.
Remove hinge trim screws. Take off hinge trim.
Identify right and left hinge for future
re-installation.
3.
Close until pins stop door. Lift door up
and out.
4.
Reverse procedure to reinstall.
Note:
VDSC530T shown.
Service Diagnostics and Procedures–Disassembly
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
1
2
Summary of Contents for VDSC530 Series
Page 124: ...Wiring and Schematics Wiring Schematic VDSC530T 4B 124 2010 Viking Preferred Service ...
Page 125: ... 2010 Viking Preferred Service 125 Wiring and Schematics Wiring Schematic VDSC536T 4G ...
Page 126: ... 2010 Viking Preferred Service 126 Wiring and Schematics Wiring Schematic VDSC536T 4Q ...
Page 127: ... 2010 Viking Preferred Service 127 Wiring and Schematics Wiring Schematic VDSC536T 6B ...
