ViewZ RTDVR series, User Manual

Page: 34 / 136

34 | P a g e
SAVING the appropriate daylight saving time zone.
If choosing EU or OTHERS, set the applicable conditions.
The options are:
OFF : Daylight saving is turned off.
USA : Applies the USA daylight saving time.
EU : Applies the EU daylight saving time.
- Select the GMT AREA using the control button.
- Set the time difference with the standard time using the control button.
OTHERS : If the time zone is neither USA nor EU, set the start and end date of the daylight saving
period.
-
Select BEGIN or END using the control button and press the SEL button.
-
Select the item using the control button, select the setting value using the control
button and press the ESC button to return to SET DATE & TIME setup menu.
CAUTION:
- Do not set the start time to 23:00 for DLS.
- DLS can’t be applied if the date of BEGIN and END is the same.
CLIENT
ACCESS Enable/Disable remote access through network client software.
NTP NTP is an abbreviation for Network Time Protocol, which is for synchronizing the time of the
computer systems over variable-latency data networks.
PRIMARY SNTP SERVER : Input the address of the primary NTP time server.
SECONDARY SNTP SERVER : Input the address of the secondary NTP time server.
TIME ZONE : Greenwich Mean Time (GMT) is a term originally referring to mean solar time at the
Royal Observatory, Greenwich, London. Because NTP synchronizes with Greenwich Mean Time
(GMT) regardless of geography, users must set their own time difference.
CONNECTON MODE : Select NTP time server connection mode.
INTERVAL : Synchronize the clock by hours which is set on the connection period menu.
TIME : Synchronize the clock at the time daily which is set on the connection period menu.
CONNECTION PERIOD : 1~24