ViewZ RTDVR series, User Manual

Page: 27 / 136

27 | P a g e
Table 3.4.3. Menu item in SPOT-OUT Setup Screen
Item Description
SPOT ON EVENT Enable/Disable display of the channel when an event is active.
SPOT EVENT
DWELL TIME Set the dwell time for the display of the event activated channel. (1-10sec)
SEQUENCE Enable/disable sequential display of spot channel in full screen.
If select ON, spot channel selection screen is displayed.
SEQ-DWEL TIME Set the dwell time for the spot channel display.(1-10sec)
SP’OT CHANNEL Select a channel for spot monitoring using the mouse or the control button on
the remote control and press OK button.
3-4-3. CONTROLLER & PTZ Setup
To control the PTZ functions of the camera, connect a controller to the RS-485 port.
①
Connect the RS-485 cables of the PTZ camera to the RS-485 port on the rear panel.
② Press the PTZ menu button. Then PTZ menu screen is displayed as below.
Figure 3.4.4. CONTROLLER & PTZ Control Setup Screen