ViewZ RTDVR series, User Manual

Page: 22 / 136

22 | P a g e
3-2. Setup – Display Mode
In the SETUP menu, select the DISPLAY tab . Then, the DISPLAY menu is displayed as pictured below.
Figure 3.2.1. Display Mode Setup Screen
Table 3.2.1. Menu Items in DISPLAY Mode Setup
Item Description
OSD Enable/disable on-screen-display.
OSD CONTRAST Set the visibility level of the On Screen Display (OSD) (0~100)
SEQUENCE Enable/disable sequential display of video in full screen mode.
SEQ-DWELL
TIME Set the dwell time of each, quad or 9 channels display in sequential display mode.
(3-60seconds)
CHANNEL
Select a channel for applying the following settings using the mouse or control
button on the remote control. Press the right square button to change the setting
value of all channels at once. Press SEL button to change the setting value of all
channels at once. Left click on the mouse to highlight the setting and double-click
if you want to change the value. Once the value has been changed, select OK to
confirm the changes.
(COVERT, BRIGHTNESS,CONTRAST,HUE,SATURATION)
NAME Set the channel name. The name can be made by 10 characters at most.
COVERT Enable/disable display of the specified video channel in live display mode.
BRIGHTNESS Change the brightness value of the specified channel. (0~100)
CONTRAST Change the contrast value of the specified channel. (0~100)
HUE Change the hue value of the specified channel. (0~100)
SATURATION Change the saturation value of the specified channel. (0~100)