27
Matching the control unit to the heating system
The control unit must be matched to the equipment level of the system. Various sys-
tem components are recognised automatically by the control unit and the relevant
codes are adjusted automatically.
■ For the selection of an appropriate scheme, see the following diagrams.
■ For coding steps, see page 41.
System version 1
One heating circuit without mixer A1 with/without DHW heating, with/without
low loss header
1
2
7
3
4
6
5
9
qP
8
7
ID: 4605139_1001_01
1
Vitodens 200-W
2
Outside temperature sensor (only
for weather-compensated control
units)
or
Vitotrol 100 (only for constant tem-
perature control units)
3
Heating circuit pump
4
Circulation pump for cylinder heat-
ing
5
DHW cylinder
6
Cylinder temperature sensor
7
Heating circuit without mixer A1
(heating circuit 1)
8
Heating circuit pump A1
9
Low loss header
qP
Flow temperature sensor, low loss
header
Commissioning, inspection, maintenance
Further details regarding the individual steps
(cont.)
5692 843 GB
Summary of Contents for Vitodens 200 WB2C 45
Page 147: ...147 5692 843 GB...
