1.
Remove electrode
B
.
2.
Release the three Torx screws, and
remove thermal insulating ring
C
.
3.
Release the four Torx screws, and
remove burner gauze assembly
D
with its gasket
E
.
4.
Insert and secure a new burner
gauze assembly
D
with a new
gasket
E
.
Torque: 3.5 Nm.approx.
5.
Refit the thermal insulation ring
C
.
6.
Refit the electrode
B
.
Torque: 2.5 Nm.approx.
Checking and adjusting the ignition and ionisation electro-
des
A
Ignition and ionisation electrode
1.
Check the electrode for wear and
contamination.
Routine Servicing Instructions
(cont.)
61
Service Instructions
58
62
670
GB
Service
