53
Commissioning (configuration, parameter settings and
function checks) can be carried out with or without the
commissioning assistant (see following chapter and
"Vitotronic 200" service instructions).
Note
The type and extent of the parameters depend on the
heat pump type, on the selected system scheme and
the accessories employed.
Commissioning with commissioning assistant
The commissioning assistant automatically guides you
through all the menus where settings have to be made.
For this, "Coding level 1" is automatically active.
!
Please note
Incorrect operation at "Coding level 1" may
result in damage to the appliance and the heat-
ing system.
Observe the information in the "Vitotronic 200"
service instructions, otherwise the appliance
warranty will be void.
Turn on the ON/OFF switch of the heat pump control
unit.
■
The prompt
"Commissioning start?"
appears
auto-
matically
on 1st commissioning.
Note
The commissioning assistant can also be started
manually
:
To do this, press and hold
when switching on the
heat pump control unit (progress bar visible).
■
When the unit is first commissioned, the display is in
German:
Sprache
Dansk
Cesky
Bulgarski
Deutsch
Wählen mit
ê
ê
ç
DE
BG
CZ
DK
ê
ê
(
Fig. 38
■
Manually switching some appliance components dur-
ing commissioning enables the heat pump control
unit to display messages. These are not appliance
faults.
Commissioning, inspection, maintenance
Commissioning the system
5838144
Summary of Contents for Vitocal 300-G Pro BW 302.D090
Page 90: ...90 5838144...
Page 91: ...91 5838144...
