Viessmann BWT 241.A Series, Installation And Service Instructions Manual

Page: 34 / 124

34
2x
< 42 V
400/230 V
< 42 V
400/230 V
Overview of the heat pump control unit electrical connections
Note
■ Route 230 V~ cables and LV cables
separately and bundle them tightly
together at the terminals. This ensures
that, in case of failure, for example
when detaching a wire, the wires can-
not drift into the adjacent voltage area.
■ Strip the insulation as close to the ter-
minals as possible.
■ If two components are connected to
the same terminal, press both wires
together into a single wire ferrule.
Installation sequence
Electrical connection
(cont.)
5601 598 GB