21
Assembly and sealing faces to bear in mind
A
Fig. 12
A
Diaphragm grommets
1.
!
Please note
Leaking hydraulic connections lead to appli-
ance damage.
Ensure the diaphragm grommets at the pipe
entries are seated correctly. Seal pipe entries
with sealing tape if necessary.
2.
Fit the cylinder module in reverse order to that
described under "Removing the cylinder module":
See page 16.
!
Please note
Leaking hydraulic connections lead to appli-
ance damage.
■
Make watertight hydraulic connections
between the heat pump module and cylin-
der module.
■
Ensure the diaphragm grommets at the
hose outlets are seated correctly.
Seal hose outlets with sealing tape if nec-
essary.
!
Please note
Seal the appliance so it is soundproof and
impermeable.
The sealing tape of the side panels must sit
tight against sealing surfaces
B
of the cas-
ing: See diagram below.
Fig. 13
B
Sealing face
C
Diaphragm grommets
Installation sequence
Installing the internal unit
(cont.)
5700 582 GB
Installation
