Connect the supply line (1).
Connect the drainage line (2).
Up to the next branch into the sewer line, use DN 50 as a minimum.
Downstream of the branch, extend width to DN 70 as a minimum,
depending on the consumer.
There is no need to install another siphon.
Backflow
The device is equipped with an overflow detection sensor.
In case of a backflow, ongoing flushing operations are
aborted, pending flushing operations are not started. After a
backflow, it is mandatory that you reset the control; without
a reset, there will be no more water exchange. To reset,
press the „Reset“ button.
NOTICE!
In case of an external backflow, wastewater leakage over
the free discharge area cannot be avoided. Take appro-
priate measures.
3.3.3
Connecting electrical components
The device has the following electrical components:
n
Mains plug for power supply
n
Control unit for the flush valve
n
Terminals for connection to external sensors for operating / alarm
messages
DANGER!
Risk of electric shock
An electric shock can lead to burns and serious injury and
even death. Only allow electrical work to be carried out by
qualified electricians.
– Work on the electrics may only be carried out by trained
electricians.
– De-energise the connection line before connecting the
mains plug.
1
2
Handling
Flush valve universal
35 from 62
