Victory EMHD Series Operator'S Manual Download | Manualshive

Page: 22 / 57

background image

Operator’s Manual Victory EMHD Series

- Page 22 of 57 -

Version 2.0

WARNING Decal

•

Swinging devices, keep a safe distance.

ATTENTION POINT Decal

•

Ad grease regularly to the desired nipple.

4.12

Safety for Starting and Stopping

◼

Check the tractor master shield over the PTO stub shaft. Ensure it is in good condition and
fastened securely to the tractor. Purchase a new one if it is damaged or missing.

◼

All tractors not equipped with a

‘

live

’

PTO need to be fitted with an over-running PTO clutch.

These clutches are available through most farm equipment stores.

N O T I CE :

•

The addition of an over-running PTO clutch may change the length of the
PTO driveline required.

•

Pay extra attention to the instructions on the PTO Driveline Installation.
Be sure that the driveline system guarding is adequate.

◼

The mowing power is supplied from the tractor PTO. Refer to your tractor manual for PTO
instructions and Hydraulic system instructions. Know how to stop the tractor and mower
quickly in an emergency.

◼

When engaging the PTO, the engine rpm should always run idle. Once engaged and ready to
start working, raise PTO speed to 540 rpm and maintain it throughout the working operation.

4.13

Calamities

Calamities are unintended or unexpected events related to an activity's quality. These events have
severe harmful consequences, up to and including death. This includes any accident that directly or
indirectly results in device damage and personal injury to one or more persons.

◼

Concerning this flail mower, calamities arise when unauthorized persons use the machine.
Never lend the flail mower without the Operator's manual. Ensure that people always read and
understand the manual content before use.

«
...
20
21
22
23
24
...
»

Summary of Contents for EMHD Series


























































Reviews:

No comments

Related manuals for EMHD Series

ACS880-01 Series

Brand: ABB Pages: 238

Brand: Yardistry Pages: 9

Brand: Rangevision Pages: 28

Brand: Xo Pages: 59

Brand: Falcon Pages: 8

Brand: Palmer Pages: 2

Brand: Rath Pages: 5

Brand: Ironton Pages: 6

Brand: York Pages: 16

i.Profiler plus

Brand: Zeiss Pages: 66

Brand: ZOLL Pages: 48

Brand: Additel Pages: 107

Brand: Easylife Pages: 3

Brand: York Pages: 32

Brand: 4iQ Pages: 6

PowerGen 5650 Series

Brand: Qnergy Pages: 10

Brand: A.J.Antunes Pages: 24

Brand: B&G Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands