Operator’s Manual Victory EMHD Series
- Page 28 of 57 -
Version 2.0
Adjust the Mowing height and Rear roller height
The mower should be operated at an acceptable height to conduct precise work. To save power
and reduce the wear of the machine, you must set the mowing height and the rear roller height
properly.
Mowing Height:
◼
Raise and support the mower with
suitable blocks beside the skids.
◼
Untighten nuts (1 & 2).
◼
Remove bolt (1) and move the skid
to the desired position for the
mowing height (three options).
◼
Fit and hand-tighten the nut.
◼
Remove bolt (2) and move the skid
to the desired position.
◼
Fit and hand-tighten the bolt and
nut.
◼
Tighten both nuts.
◼
Repeat this action on the other
mower side.
Rear Roller Height:
◼
Raise and support the mower with
suitable blocks beside the skids.
◼
Untighten nuts (3 & 4) from the rear
roller bearing block.
◼
Remove bolt (4) and move the roller
(5) to the desired height (two hole
options).
◼
Fit and hand-tighten bolt and nut
(4).
◼
Tighten both nuts (3 & 4).
◼
Repeat this action on the other
mower side.
