Operator’s Manual Victory EMHD Series
- Page 42 of 57 -
Version 2.0
Season Maintenance
◼
Check the machine as above for daily maintenance.
◼
Check the bearings of blade spindles for wear and tear. If worn, disassemble, clean or replace
them if necessary; use grease as required.
◼
Check the drive belts, and tighten them if necessary.
8.3
Annual Maintenance
1.
Thoroughly clean the flail mower of debris and residue.
2.
Drain the gearbox and clean it thoroughly. Fill with new gear oil up to the dedicated oil level.
3.
Check and clean all axles. Check oil seals and replace them if necessary.
4.
Check all flails and replace them if they are worn out or damaged.
5.
Check the side skirts; return them to their original technical condition. Replace damaged or
broken protective devices.
6.
Remove the PTO shaft from the machine. Pull the PTO shaft apart. Check and replace any
components that are damaged or worn.
Install the PTO shaft on the device. The PTO shaft should telescope easily, and the guard
turns freely on the shaft, grease if necessary.
8.4
Lubrication table:
8 hrs/Daily:
40 hrs:
Annually:
Lubricate PTO Shaft:
Yes
Lubricate Caster Wheels:
Yes
Yes
Yes
Lubricate Blade Spindle:
Yes
Yes
Yes
Lubricate swing arms (4 nipples):
Yes
Lubricate rotor shaft:
Yes
Lubricate Rear roller bearings:
Yes
Clean Machine:
Yes
Clean PTO Shaft Cover guard:
Yes
