77
Maintenance
Sidestand Lubrication
Periodically lubricate the sidestand pivot and
the ends of the spring. See page 43 for sidestand
inspections.
Fastener Inspection
1. Inspect the entire motorcycle chassis and
engine for loose, damaged or missing fas-
teners. Tighten loose fasteners to the proper torque.
Tip:
Refer to the specifications section of this manual or the service manual for fastener torque values,
or see your VICTORY dealer.
2. Always replace stripped, damaged or broken fasteners before riding. Use genuine VIC-
TORY fasteners of equal size and strength.
Side Covers
Remove the left side cover to access the electronic con-
trol module, diagnostic connector and chassis-to-engine
harness connector.
Remove the right side cover to access the fuses, rear
suspension air fitting, clutch cable adjuster, purge valve
and flasher unit.
Remove both side covers to access the seat screws.
1. Pull outward at each corner of the side cover to dis-
engage the three darts.
2. Remove the side cover from the motorcycle.
3. To reinstall the side cover, make sure each rubber
grommet is properly positioned. Align each dart
with the appropriate grommet and press inward
firmly to secure each dart.
Lubricate
Grommets
Summary of Contents for 2011 Cross Country
Page 1: ...PMS 419 2011 Rider s Manual Victory Cross Country TM Victory Cross RoadsTM...
Page 3: ...The text is printed on 100 recycled with 40 post consumer waste PCW...
Page 5: ...1 2011 Rider s Manual Victory Cross Roads Victory Cross Country...
Page 60: ...56 Maintenance Maintenance Log Maintenance Performed Miles Km Notes Performed by...
