85
V2002D-PTZ
User’s Manual
Preset/Tour Move Speed: 1 ~ 500
Use the slider to select Preset and Tour speed. Higher value means the Preset and Tour movement
speed will be faster.
Note
Refer to sections “
10.3 Preset
” and “
10.4 Tour
sections for details on Preset and
Tour actions.
Show Preset Name on Screen: On/Off
Select
“On” to show P
reset name on the screen.
Calibration
This is used to calibrate the lens as needed.
10.2
Pan/Tilt
Pan/Tilt section is where user can configure Pan and Tilt actions. Changes in this section will affect
the behavior of PTZ control panel.
Pan/ Tilt Setting
Figure: Pan/Tilt Setting
Auto Flip: On/Off
The Auto Flip function is useful for following a person who passes directly beneath the camera; the
camera will pan 180
°
and reposition itself for uninterrupted viewing of any subjects that pass directly
beneath the camera, as long user holds the down cursor of the Control Panel.
Proportional Speed: On/Off
Set Proportional Speed
“O
n
”
for the camera to automatically decrease or increase the Pan and Tilt
speeds in proportion to the amount of zoom. At tele zoom settings, the Pan and Tilt speeds will be
slower.
Manual Move Speed: 1 ~ 100
Allows the user to define Pan and Tilt movement speed. Higher values mean faster speed.
Pan/Tilt Limit
Depending on where the camera is installed, as the camera view changes based on PTZ operation,
situations can arise where the view covered by the camera is not relevant (e.g., the camera view is
facing a wall, where nothing will happen). To avoid this situation, user can specify limits on Pan and
Tilt operations and let the camera focus only on important scenes. For instance, instead of setting the
camera to cover from 0
°
to 200
°
for scan action; user can set scan limit from 0
°
to 150
°
that covers the
region of interest where activity usually would occur, while 151
°
and above is ignored, as this region
may have an object blocking the scene.
Summary of Contents for Roughneck Pro V2002D-PTZ
Page 98: ......
