Vicon Roughneck Pro V2002D-PTZ, User Manual

Page: 10 / 98

6
V2002D-PTZ User’s Manual
you can input certain keywords into the field nearby and also narrow down the range by selecting
the criteria from the dropdown menu for a target search on cameras connected.
9. Press “ Auto Set IP Address ” button to automatically give each camera an IP address from a
predefined range and connected to predefined network internet controller.
10. Click “ FW Upgrade ” button to upgrade the firmware of selected camera. A pop up window like
the image below will show up.
Figure: IP Toolbox FW Upgrade
Follow the steps below to complete firmware upgrade:

Click or to add or remove camera to be upgraded (only verified cameras will be shown on
this list).

Select a camera or click “ Select All ” button to select a camera or all the cameras on the firmware
upgrade list, respectively.

Click “ Add ” or “ Cancel ” button to confirm the selected cameras for upgrade or to cancel the selection,
respectively.

Enter the path for the desired firmware (.tar) or click ; then follow the instructions to find and upload
the .tar file.

When the process is complete, click again to return to the list of all cameras located in the local
network.