88
V2002D-PTZ
User’s Manual
Go to: Tilt/Zoom/Focus
Go to a previously setup tilt, zoom and focus for Scan action, by dragging and adjusting the tilt, zoom
or focus bar or entering a value for setting tilt, zoom or focus and then saving by clicking “Save”.
Click
“Tilt”, “Zoom” or “Focus” of “Go
to” function
for the action to take effect.
Clear: Zoom/Focus
Clear current zoom and focus for Scan action, by dragging and adjusting the zoom or focus bar or
entering a value for setting zoom or focus and then saving by clicking “Save”
. C
lick “Zoom” or “Focus”
of “
C
lear” function for the action to take effect.
Scan Limit
User can specify limits on Scan operation and let the camera focus only on important scenes. To limit
the scan position, select On to Enable the limit settings. Click Save to save the limit settings.
Note
Refer to “
Table: Preset/Tour/Pattern Limit
” in”
10.2 Pan/Tilt
” section for detail
s.
10.4
Preset
Preset action allows the creation of up to 128 predefined camera views called Preset. User must
manually call a Preset and when a Preset is called, the camera will automatically move to the
predefined view and stay there until another PTZ operation is triggered. Basically, calling a Preset is
telling the camera to go to a specific view and stay there. At a Preset the view is focused correctly
based on settings, but while the camera is moving to a Preset the view may not be well defined. A
Preset is usually used when user wants to quickly access a key monitoring area and then monitor the
area for undetermined time.
Presets can be added, modified, viewed and deleted.
Additionally, Preset Name and Text Color, Auto Refocus and Motion Area are values that add to the
ease of use of Presets.
Preset Position
Figure: Preset List
Summary of Contents for Roughneck Pro V2002D-PTZ
Page 98: ......
