51
V2002D-PTZ
User’s Manual
7.
Event Source
Event source configurations consist of Event Specific, Handler and Arming Schedule. The table below
gives an overview of event source configurations and relevant remarks.
Type
Settings
Remark
Event Specific
Handler
Arming
Schedule
Alarm
NO/NC
V
V
Audio
Sound Intensity
V
V
Motion
Enable. Set object
size/sensitivity in PTZ
section
V
V
Network
Wired Network Loss/
Wired Network Conflict
V
-
Does not support HTTP
Generic Event.
Schedule
Regular/Persist trigger
event action (without
event source as premise)
V
V
Does not support HTTP
Generic Event.
Tamper
Sensitivity
V
V
mSD
Healthiness
Free Space/Mount Failure
V
-
Handlers
Alarm Out
Alarm output function will be enabled when event occurs. Check the box to activate this function.
Audio
Enable: Audio output function will be enabled when event occurs. Check the box to activate this
function.
Sound: 1~10
10 sound types are available from the dropdown menu for audio output. Be sure to set up the sound
file beforehand. Refer to the “
” section
for details.
Snapshot: Store to Edge/Store to FTP
Store to Edge: Check the box to save snapshot to the SD card when event occurs; be sure a
customer-supplied SD card is inserted in the slot to use this option.
Store to FTP: Check the box to save snapshot to the FTP remote device when event occurs. Note
that under Handler, the camera acts as FTP client, while the remote device acts as FTP server, and
the FTP server path should be properly configured
in advance in “
” section.
Recording
Edge Record: Check the box to save the recorded video to the SD card when event occurs; be sure
a customer-supplied SD card is inserted in the slot to use this option.
Summary of Contents for Roughneck Pro V2002D-PTZ
Page 98: ......
