87
V2002D-PTZ
User’s Manual
10.3
Scan
Scan action allows camera to automatically pan back and forth regularly within a specified limit, at a
constant speed and with predefined and constant tilt, zoom and focus values. In Scan action, the
entire scene (sequence of views) is being monitored repeatedly, so it is suitable for touring the scene
without losing focus at any time and keeping the covered scene defined correctly.
Scan Setting
Figure: Scan Setting
Scan Mode: Auto Scan/Frame Scan
Auto Scan: Camera pans back and forth regularly with predefined tilt, zoom and focus.
Frame Scan: Camera pans back and forth regularly with predefined tilt, zoom and focus, but during
the scan the camera will stop 8 times and stay at a view depending on the Scan Left/Right Limit.
Tilt: 0 ~ 105
Drag and adjust the bar or enter a value for setting tilt angle for Scan action.
Zoom: 1 ~ 300
Drag and adjust the bar or enter a value for setting zoom depth for Scan action.
Focus: 0 ~ 100, 0 = Auto Focus
Drag and adjust the bar or enter a value for setting focus depth for Scan action.
Speed: 1 ~ 90
Allows the user to define pan speed for Scan action. Higher value is faster speed.
Action: Start/Stop
Click “Start” to
begin
Scan action and “Stop” to
cease Scan action.
Set Current Position to: Tilt/Zoom/Focus
Set current position to tilt, zoom or focus for the Scan action by dragging and adjusting the tilt, zoom
or focus bar or entering a value for setting tilt, zoom or focus and then saving by clicking “Save”.
Click
“Tilt”, “Zoom” or “Focus”
of “Set current position to” function
for the action to take effect.
Summary of Contents for Roughneck Pro V2002D-PTZ
Page 98: ......
