9
V2002D-PTZ
User’s Manual
Relearn Background: Click this button to save new background that later will be compared to
current background for motion detection purposes.
PTZ Control Panel
Whether in Live View or Configuration, user can always see the PTZ Control Panel on the lower-left
side of window. The PTZ Control Panel allows quick access for execution of Pan, Tilt, Zoom and Focus
movements, as well as Preset, Tour and Pattern actions.
Note
Refer to “
9.4 Preset
”, “
9.5 Tour
”
and “
9.6 Pattern
" for details on Preset, Tour and
Pattern.
Figure: Pan/Tilt Control
Use the Pan/Tilt Control to pan and/or tilt camera in up/down/left/right/up right/up left/down
right/down left directions to adjust camera view. Click once to perform the movement once. Clicking
and holding allows continuous movement. Click the center part of Pan/Tilt Control to go to home view.
A more convenient way to change the camera view is to
“Click on Center”
function, which allows user
to double click directly on a specific point in the view, and as response, camera will adjust its view and
make the double clicked point center of the view.
Note
“
Click on Center
”
function is only allowed in ActiveX mode and can be performed in
any view in Live View or Configuration.
In addition, user can adjust camera view using the options listed below.
Item
Option/Range
Description
Up - Down
0
~ 110
Click and drag to tilt camera view.
Left - Right
1
~ 360
Click and drag to pan camera view
Wide - Tele
1x
~ 20x (up to 240x based
on Digital Zoom Limit)
Click and drag to zoom in/out camera view
Far - Near
1
~ 100
Click and drag to adjust focus of camera view
Pan Value
1
~ 360
Enter a value for pan angle
Tilt Value
0
~ 110
Enter a value for tilt angle
Zoom Value
1x
~ 20x (up to 240x based
on Digital Zoom Limit)
Enter a value for zoom depth
Focus Value
1
~ 100
Enter a value for focus depth
Preset
1
~ 128
Select a preset action
Tour
1
~ 4
Select tour action
Pattern
1
~ 4
Select pattern action
Summary of Contents for Roughneck Pro V2002D-PTZ
Page 98: ......
