background image

XX185-30 Rev 807 Kollector Lite 

Getting to Know ViconNet 

 41 

To remove the camera from the Main Window Display Location area but still view its 
recorded contents: 

• 

Deselect the camera in the 

Recorded Device Contents

 area. The following occurs: 

• 

The icon is not highlighted in the tree. 

• 

The camera name is removed from the 

Main Window Display Location

 area. 

• 

The camera name appears as deselected 

 in the 

Recorded Device Contents 

area, but 

its recorded contents are still displayed.  

For the Kollector Lite, the maximum number of cameras that can be displayed simultaneously is sixteen, 
depending on the current display mode. If you select more than the maximum number, you will be prompted 
to remove a camera to make room for another one. You can also change the maximum number and location 
of the recorded cameras viewed and play back, as described in 

Main Window Display Location Area

page 46. 

Navigator Tree Controls 

 

The Navigator tree controls, displayed at the bottom of the Navigator tree, enable you to define what is 
displayed in the Navigator tree, as follows: 

 Regular:

 Displays only the regular databases that contain recorded video segments. Refer to 

Chapter 5, Recording Live Video 

for additional details about recording live video. 

 Archives:

 Displays only the archives (and their relevant devices) that have been created in the 

system. Refer to 

Chapter 6, Playing Back Recorded Video

 for additional details about creating 

archives and playing back recorded/archived video.  

 

Both (regular & archives):

 Displays both the regular databases (and their relevant devices) and all 

current archives (and their relevant devices). 

Recorded Device Contents 

The recorded devices selected for playback and other purposes are managed within the 

Recorded Device 

Contents 

area and are managed using the elements described below:  

• 

Recorded Device Contents Area,

 page 42 

• 

Time Interval Tabs,

 page 43 

• 

"From" and "To" Date/Time Controls,

 page 43 

• 

Time Interval Map Area,

 page 44 

• 

Playback Start Time Selector,

 page 44 

• 

Playback Start Date/Time Control,

 page 44 

• 

Selected Recorded Interval,

 page 45

 

• 

Zoom Controls,

 page 45 

Summary of Contents for KollectorLite XG



























































































































































































































































































Reviews: