266
•
Setting Up a VPN Service
XX195-30 Rev 807 Kollector Lite
To set up the IP address:
12. Repeat steps 1 through 3 in the previous procedure to open the
Network Connections
window.
13. Right-click
Incoming Connection
and select
Properties
from the shortcut menu. The
Incoming
Connection Properties
window is displayed:
14. Select the
Networking
tab, select the
Internet Protocol (TCP/IP)
checkbox and then click
.
The
Incoming TCP/IP Properties
window is displayed:
15. Select the
Specify TCP/IP addresses
radio button and in the
From
and
To
fields, enter the range of IP
addresses. It is important to ensure that you do not use IP addresses that are already in use in your
network and that they are under the same network as the Kollectors/Workstation.
16. When you have finished, click
. The IP addresses you specified are assigned.