XX185-30 Rev 807 Kollector Lite
Getting to Know ViconNet
•
25
When a camera's video is displayed in one of the video display locations, its related information is also
displayed, such as the following:
•
Live
,
Playback
or
Recording
indications, according to the function currently being performed.
•
The camera name during recording operations
•
The recording time and date during playback operations.
•
P
(Primary) or
S
(Secondary) status of the site relative to this camera. The first site to operate a camera
(whether locally or remotely) acquires Primary status relative to it. Any other site that accesses the
camera while it is already being operated acquires Secondary status relative to that camera. If the
Primary site disconnects from a camera that currently has Secondary sites associated with it, the
secondary site that connected earliest automatically acquires Primary status relative to that camera.
•
The picture quality and refresh mode during Live and Playback operation. For example,
indicates the
quality 5 at the Normal refresh mode. (For details, refer to the
About
Picture Quality and Refresh Mode
section, page 30.
If you want to enlarge the size of an image in one of the video display locations, double-click the required
location. The selected image is maximized to fill the entire
Video Display
area. You can click the image again
to restore it to its previous size.
You can also change cameras from one video display location to another within the
Video Display
area, as
required, for example, when viewing live and recorded segments simultaneously. The default location for all
the display modes is the top left, but you can change it by clicking in a different location. The pink border
moves and indicates the new active location.
Right-clicking anywhere in a camera that is currently recording displays a shortcut menu with five options, as
shown.
NOTE:
If the selected camera is live, all five options are displayed. If the selected camera is not live, only
the
Start Playback From Time
option is displayed.
