Vicon KollectorLite XG Software Manual Download

Page: 85 / 282

XX185-30 Rev 807 Kollector Lite

Configuring the ViconNet System

•

This window is accompanied by a sound (similar to the

Alarm

window). Selecting the

Mute

checkbox

silences the alarm for this message; however, the next time the window is displayed, the alarm will sound.
Checking the

Disable sound

checkbox disables the sound option completely, meaning that the alarm will

not sound again.

To see more details about the error, double-click it to open a window like the one shown here.

NOTES:

The local site in which the failure occurred receives the user notification even if it was not selected in the
Nucleus CFN setup.

Disconnected sites are marked with a (*).

Summary of Contents for KollectorLite XG



























































































































































































































































































Search results

Summary of Contents for KollectorLite XG

Reviews:

Related manuals for KollectorLite XG

Brands by name

Popular brands

Vicon KollectorLite XG, Software Manual

Search results

Summary of Contents for KollectorLite XG

Reviews:

Related manuals for KollectorLite XG

Brands by name

Popular brands