XX185-30 Rev 807 Kollector Lite
Configuring the ViconNet System
•
109
Configuring Auto/Manual FPS (Frames Per Second)
The purpose of the Auto/Manual FPS feature is to enable the user to determine the FPS for each camera.
Here, the user can select whether the FPS distribution to the DSPs (Digital Signal Processors)
is automatic
or manual. The default setting for FPS is automatic.
NOTE:
Digital Signal Processing is a method of digitally processing signals that are converted from analog
form.
The maximum FPS that can be assigned to any specific DSP is 30 for NTSC format (25 for PAL format). If
the total FPS for two cameras assigned to the same DSP is above this maximum and
Auto FPS
is
selected, the FPS on one or more cameras will be reduced to the amount of FPS available.
Example
(NTSC format)
Camera 1 and camera 5 are assigned to a specific DSP. If camera 1 has 20 FPS configured, camera 5 has
20 FPS configured and Auto FPS is selected, then the FPS for camera 5 will be cut to 10.
