XX185-30 Rev 807 Kollector Lite
Getting to Know ViconNet
•
43
You can also zoom the recorded segments in the
Recorded Device Contents
area, as described in
Zoom
Controls, page 45.
Next to each camera in the list is a checkbox, enabling you to select and deselect it as an active viewing
camera for display in the
Main
window. You can select up to sixteen cameras (depending on the selected
display mode) at one time from which to view and play back recorded video, as described in
Navigator Tree
,
page 39.
Time Interval Tabs
The time interval tabs enable you to quickly select the range of time for the recorded segment(s) that you
want to view and play back in the
Recorded Device Contents
area, as follows:
Tab Description
Displays all recorded segments for the selected cameras during the
last 24 hours
(from the current
time). This option is the default.
Displays all recorded segments for the selected cameras during the
last 72 hours
(from the current
time).
Displays all recorded segments for the selected cameras during the
last 7 days
(from the current time).
Displays all recorded segments for the selected cameras regardless of when the recording occurred.
When you select a time interval tab, the
Time Interval Map
area changes to reflect your selection, as
described below. The display of the recorded contents of the selected device is also updated, as described in
Recorded Device Contents Area
, page 41.
Refer to the following section for an alternate time interval selection method.
Date/Time Controls
The
From
and
To
Date/Time controls
in the
top-left
and
top-right
of the window enable you
to specify an exact start (
From
) and end (
To
) date and time for the recorded segment(s) that you want to view
and play back in the
Recorded Device Contents
area.
This alternate time interval selection method (used instead of the time interval tabs) lets you fine-tune the time
interval period. Using the time interval controls, you can select a specific:
•
Date range by selecting To and From dates for the recorded segment(s) you want to view (using a popup
calendar).
•
Time range (hour, minutes and seconds) for the recorded segment(s) you want to view by specifying the
required start and end time.
