44
•
Getting to Know ViconNet
XX185-30 Rev 807 Kollector Lite
After you select a date range and/or time range, you must click the
View In
button to implement the selection.
The
Time Interval Map
area is automatically updated according to the dates and times specified, as
described below. In addition, all the video segments recorded during the date and time range are displayed,
as described in
Recorded Device Contents Area
NOTE:
The time interval controls are used in the Selecting Payback Time Interval procedure in Chapter 6,
Playing Back Recorded Video.
Time Interval Map Area
The
Time Interval Map
area displays a graph with the current range of time specified by the selected time
interval tab or controls, as follows:
When you modify the time interval, as described in
Time Interval Tabs
Time Interval Controls
,
above, the
Time Interval Map
area automatically changes and reflects the new time interval.
Playback Start Time Selector
The playback start time selector is a scrollable pink arrow with a vertical
line running the length of the
Recorded Devices Content
area. You can
move the arrow to indicate the location in the recorded segment where the
playback will begin when it is played back in the
Main
window.
When you click on the pink arrow, a tooltip appears, displaying the date
and time of its current location in the recorded segment. This enables you
to move the arrow and pinpoint the exact playback start time, if required.
For detailed procedures for using the playback start time indicator, refer to
the
Selecting the Playback Start Time
section in
Chapter 6, Playing Back
Recorded Video
.
Playback Start Date/Time Control
You can also set the playback start time by using the Start Date/Time
control
on the
bottom-left
side of the window.
