32
XX207-00-02 Rev 910 MP-980DN Camera
“Time”-
Select to show
“Always”
or input the time interval (24-hr format).
“Action”-
The actions to be performed when a trigger is activated.
“Trigger digital output for _ seconds”-
Check to set specific seconds when event is triggered
and enter the length of the trigger interval.
Server
– Click
Add Server
to specify where the notification messages are sent when a trigger is activated.
“Server name”-
The unique name for server
There are four kinds of servers, email server, FTP server, HTTP server and network storage.
“Sender email address”-
Email address of the sender
“Recipient email address”-
Email address of the recipient
“Server address”-
Domain name or IP address of the external email server.
“User name”-
User name on the external email server.
“Password”-
Password on the external email server.
“Server Port”
- Default mail server is set to 25; this can be manually changed.
Click
Test
to make sure settings are correct. Click
Save
to enable settings and
Close
to exit.
FTP
“Server address”-
Domain name or IP address of the external FTP server.
“Server port”-
Default port 21. The user can change this value from 1025 to 65535.
“User name”-
Login name on the external FTP server.
“Password”-
Password on the external FTP server.
“FTP folder name”-
Folder on the external FTP server where media file is placed..
“Passive Mode”-
Check to enable passive mode in transmission.
Click
Test
to make sure settings are correct. Click
Save
to enable settings and
Close
to exit.
HTTP
“URL”-
The URL to upload the media.
“User name”-
User name on the external HTTP server.
“Password”-
Password on the external HTTP server.
Click
Test
to make sure settings are correct. Click
Save
to enable settings and
Close
to exit.
Network storage-
Check to send media files to a network storage location when a trigger is activated. Refer
to Network Storage Location section.
Click
Save
to enable settings and
Close
to exit.
