24
XX207-00-02 Rev 910 MP-980DN Camera
3. The Camera Details area will become enabled.
4. Enter a Camera Name and Password for this camera (the same user name and password that is in the
camera) and select IP or DNS. (DNS is used to add the camera by its hostname on the network instead
of its IP address and is only available if the camera is registered in the DNS.)
5. The format for this camera is set from the camera’s Video Settings screen. Select the same format,
MPEG-4 or M-JPEG.
6. The Port Number will default to 80. This is the most standard port. The port selected here must be the
same as the port selected in the Network Settings - Advanced screen in the browser.
7. The User Name and Password for this camera is the camera’s identity in its browser. It is recommended
that the user be administrator level to be able to access all camera features.
8. Click the
button. This is a direct link to the browser for that
camera. Below is a sample screen; account is the user name in this case. After Login, the camera set-
tings can be modified as needed.
9. Click
Save
to save your settings and
Close
to
exit the window. An
Undo
button is provided.
To add cameras manually
1. Click
the
button on the
I-Onyx 9xx and Third Party Camera settings
screen.
The Camera Details area will become enabled. Some cameras will show up in the
Available Devices
on Net
dropdown list; when selected, these cameras are automatically added to the list when they are
on the network.
2. Enter a Camera Name for this camera and select IP (DNS is not available). From the Vendor dropdown
list, select Vicon.
3. The format for this camera is set from the camera’s Video Settings screen. Select the same format,
MPEG-4, M-JPEG or H.264.
