20
XX207-00-02 Rev 910 MP-980DN Camera
Motion Detection
The camera can be configured for motion detection. ViconNet receives this as an external alarm. Refer to
XX206 for details on how to use motion detection with ViconNet.
“Enable motion detection”
Check this option to turn on motion detection.
Click on the
New
button to add a new window. Up to three windows can exist simultaneously.
Use the mouse to click, hold, and drag the window frame to resize or the title bar to move the window. Click-
ing on the ‘x’ at the upper right-hand corner of the window deletes the window. Click on the Save button to
save the settings.
A graphic bar will rise or fall depending on the image variation. A green bar means the image variation is
under monitoring level and a red bar means the image variation is over monitoring level. When the bar goes
red, the detected window will also be outlined in red. Going back to the home page, the monitored window is
hidden but the red frame shows when motion is detected.
"Window Name"
The text will show at the top of the window.
“Sensitivity”
This sets the endurable difference between two sequential images.
“Percentage”
This sets the space ratio of moving objects in the monitoring window.
Higher sensitivity and smaller percentage will allow easier motion detection.
Select
Profile
to set up additional motion detection details.
