English
|
41
\
\
Setting the Privacy Masking area
You can specify the privacy masking area.
1.
Click on the <
aRea SePUP
> tab on the right side to
display the area setup page.
2.
When using the remote, press the [
Select
] button to
show the selector first.
3.
Use direction keys to move to the desired channel,
and press the [
Select
] button to begin area setup. Use
direction keys to set the masking area. When using the
mouse, hold the mouse left button and drag to set or
cancel the masking area.
4.
Selecting masked area again will exclude the
corresponding block from the masking area.
\
\
installation Mode
The network accessibility to the camera is defined by the camera’s operation mode.
1.
From <
SySteM SetUP
> - <
caMeRa
>, select
<
inStallation Mode
>.
2.
Use [
▲▼◀▶
/enteR
] buttons of the remote or the
mouse to select one from CCTV Mode (Recommended)
and OPEN Mode (Advanced).
Setting to the “
Open Mode
” allows access to all ports
including the camera’s connection port from the external
network. Accordingly, the camera’s network transfer and
transferred video’s quality will be affected by the relevant
communication devices and environment.
CCTV mode is set for camera installation mode by default and
both main body and hub (optional, 16CH) support the PLUG & PLAY function. (You cannot use the CCTV mode mixed with the OPEN mode.)
In case 16CH model is set to OPEN mode, only the electrical power is supplied to the 8 cameras connected to main body and the Plug & Play
function is not supported.
3.
To apply the change, click <
aPPly
> in the bottom of the
screen.
4.
When done, press the [
exit
] button on the remote
control or click <
cloSe
> in the lower screen to return to
the previous menu.
System Setting
Summary of Contents for 16CH
Page 1: ...4CH 8CH 16CH Full HD NVR User Manual ...
Page 145: ...English 145 Product Overview IPX HUB For 16channel NVR only 305 141 38 Appendix ...
Page 157: ......
Page 158: ......