Vicon 16CH, User Manual

Page: 23 / 158

English
|
23
Monitoring
Monitoring
\ \
StaRt
1.
Connect the adaptor to the 48V PoE power input port in
the rear panel of NVR.
J
Make connection when the power is not applied yet.
2. Connect the adaptor to the 12V power input port in the
rear panel of NVR.
3.
Turn on the power switch in the rear panel of NVR. With a
beep, the logo screen appears several seconds after the
front LED turns on.
4. When the booting process is completed, the live screen
then the login screen appears.
\ \
log in
To manipulate or access the menus of NVR, you should have logged in.
1.
When the system starts, the login screen appears.
2.
Select a user and provide the password.
The default password of the " adMin " account is " 1234 ".
3.
Click < ok >.
If the login information is correct and valid, you will see
the live screen.
J
For security purpose, change the password before you use the
product for the first time after purchasing it.
\ \
log out
To prevent unauthorized access, it is recommended to log out when you leave the screen.
Hover the cursor near the bottom of the screen to display the menu.
1. In the monitoring screen, click < MenU > in the bottom
left corner of the screen to < log oUt >, or press the
[ logoUt ] button on the remote control.
2.
Access to SEARCH / ARCHIVING / SYSTEM SETUP /
RECORD SETUP / SHUTDOWN will be restricted.