English
|
39
\
\
Motion Sensor
Set the motion sensor of the camera so that it can detect a motion event.
1.
From <
SySteM SetUP
> - <
caMeRa
>, select
<
Motion SenSoR
>.
2.
Use the [
▲▼◀▶
/
enteR
] buttons on the remote control
or use the mouse to specify the use of each option item.
i
ACTIVATION : Set whether to activate motion sensor
of the camera channel.
i
MOTION MARK : Set to <
on
> to display motion
detection indicator on the corresponding channel’s
video.
3.
To apply the change, click <
aPPly
> in the bottom of the
screen.
4.
When done, press the [
exit
] button on the remote control or click <
cloSe
> in the lower screen to return to the previous
menu.
Motion area Setup
Setting the motion area may differ depending on the camera model. Below is a typical setting of the motion area.
1.
Click <
aRea SetUP
> to move to the motion area setup
screen.
2.
Select a channel to define a motion detection area.
3.
Use the arrow buttons to move to a desired block and press
[
enteR
]. The area setup will begin.
Then, use the arrow buttons to specify the area.
Alternatively, you can use the drag-and-drop method to
specify or release the area as using mouse.
4.
If you select the specified area again, it will be released.
5.
You can set the channel’s detection period for day and night, sensitivity, minimum number of blocks and interval.
i
DAYTIME : specify the time period that will be considered as daytime.
i
SENSITIVITY : Sets the sensitivity level for detection during the day time or night time.
The higher the level, the higher the detection sensitivity.
i
MIN BLOCK : 1(High) ~ 10(Low) - The lower the number is, the higher the sensitivity level becomes.
i
SELECT ALL : Select all area as motion detect area.
i
DESELECT ALL : Deselect all selected area.
Images recorded in a low contrast scene such as at night cause severe noise, triggering the motion event too often.
If this is the case, reduce the nighttime sensitivity to a degree.
J
The above options such as <
SENSITIVITY
> and <
MINIMUM BLOCKS
> and how to set the motion area may be restricted depending on the
specification of the connected camera.
System Setting
Summary of Contents for 16CH
Page 1: ...4CH 8CH 16CH Full HD NVR User Manual ...
Page 145: ...English 145 Product Overview IPX HUB For 16channel NVR only 305 141 38 Appendix ...
Page 157: ......
Page 158: ......