Vicon 16CH, User Manual

Page: 38 / 158

System Setting
38
| System Setting
direct configuration
Direct configuration support may differ from camera manufacturers.
If supported by the camera, you can access the camera via web to directly manipulate the camera, for updating the camera’s
firmware for example.
For cameras not supporting direct configuration over web, use the computer connected to the camera for configuring it.
1.
Select < diRect conFigURe > from the < caMeRa
SetUP >.
2.
Press the < StaRt > button to display a popup message.
Recording stops for the corresponding channel during
manipulating the camera.
\ \ covert Setup
You can set to hide the camera video so that a specific user or user group can not view. Set a channel(s) that you want to hide
from a specific user or user group.
1.
From < SySteM SetUP > - < caMeRa >, select
< coveRt SetUP >.
2.
Use the [
▲▼◀▶
/ enteR ] buttons on the remote control
or use the mouse to select a covert channel(s) from a
specific user group.
i
ADMIN, MANAGER, USER : Set them to < on >.
The selected channel will be covert from the applicable
user account.
i
LOG OUT : Set it to < on >. When the user logs out,
the current channel will be set to a covert channel.
i
SHOW AS : Sets how to display video of the
< coveRt channel > channel.
- NO VIDEO : Appears to have no video for the channel.
- COVERT : Shows nothing for the Live screen only.
If < NO VIDEO > or < COVERT > is specified, the camera title is reset to the default value.(ex:CAM##)
3.
To apply the change, click < aPPly > in the bottom of the screen.
4. When done, press the [ exit ] button on the remote control or click < cloSe > in the lower screen to return to the previous
menu.
To change the covert settings from user group to user, move to the < USER > menu and make necessary changes. (page 49)