Vicon 16CH, User Manual

Page: 77 / 158

English
|
77
Record Setup
\ \ operation Mode
You can set the recording options for Auto or Manual mode.
1.
From < RecoRd SetUP > menu, select < oPeRation Mode >.
2.
Use the [
▲▼◀▶
] buttons or use the mouse to set < RecoRding conFigURation Mode > to < aUto conFigURation >
or < ManUal conFigURation >.
3. Set the recording options for each selected Record mode.
4. To apply the change, click < aPPly > in the bottom of the screen.
5. When done, press the [ exit ] button on the remote control or click < cloSe > in the lower screen to return to the previous
menu.
auto configuration
If you choose your preferred record mode, the NVR will recommend you the optimized settings for the selected record mode.
i
CONTINUOUS RECORD : Records always regardless
of events.
- LONG DURATION BUT LOW QUAILTY : Recording
will proceed in the low quality at all times. As this
option will always make recording in the low quality,
the recording period is the longest compared to the
other record modes.
- HIGH QUAILITY BUT SHORT DURATION :
Recording will proceed in the best quality at all
times. As this option will always make recording in
the best quality, the recording period is the shortest
compared to the other record modes.
i
MOTION RECORD : Recording will proceed only if a
motion is detected.
i
ALARM RECORD : Recording will proceed only if an alarm event occurs.
i
MOTION/ALARM RECORD : Recording will proceed only if a motion is detected or an alarm event occurs.
i
INTENSIVE MOTION RECORD : Normally recording will be performed in a low quality. However, the quality will switch to
high if a motion is detected.
i
INTENSIVE ALARM RECORD : Normally recording will be performed in a low quality. However, the quality will switch to high
if an alarm event occurs.
i
INTENSIVE MOTION/ALARM RECORD : Normally recording will be performed in a low quality. However, the quality will
switch to high if an alarm event occurs or a motion is detected.
Recor
d Setting