Vicon 16CH, User Manual

Page: 48 / 158

System Setting
48
| System Setting
audio Setup
You can configure audio and signal beeps.
\ \ audio
You can select the default audio channel and configure network audio transmission.
1.
From < SySteM SetUP > - < aUdio >, select < aUdio >.
2.
Use the [
▲▼◀▶
/enteR ] buttons on the remote control
or use the mouse to select an item that you want to edit.
i
DEFAULT LIVE AUDIO CHANNEL : select an audio
channel to monitor on the live screen.
i
NETWORK AUDIO TRANSMISSION : decide if NVR
transfers the audio signal to the remote client.
i
RECEIVE NETWORK AUDIO : decide if NVR receives
the audio signal from the remote client.
3.
To apply the change, click < aPPly > in the bottom of the
screen.
4. When done, press the [ exit ] button on the remote control or click < cloSe > in the lower screen to return to the previous
menu.
\ \ buzzer output
You can set to output the buzzer if you manipulate the remote control.
1. From < SySteM SetUP > - < aUdio >, select < bUZZeR >.
2. Use the [
▲▼◀▶
/enteR ] buttons on the remote control
or use the mouse to select an item that you want to edit.
i
REMOTE CONTROL : specify the output of a beep
when you press a button on the remote control.
3. To apply the change, click < aPPly > in the bottom of the
screen.
4.
When done, press the [ exit ] button on the remote
control or click < cloSe > in the lower screen to return to
the previous menu.