System Setting
40
|
System Setting
\
\
PtZ Settings
You can set the camera ID, protocol, baud rate and data transmission speed for each channel.
1.
From <
SySteM SetUP
> - <
caMeRa
>, select <
PtZ
SetUP
>.
2.
Use [
▲▼◀▶
/enteR
] buttons of the remote control
or mouse to set the address (ID), protocol and data
transmission speed for each channel.
i
RS-485 : You can manually configure RS-485
communication connection to the pan/tilt base (PT
driver) of IP Box type camera or motorized zoom lens.
Check to enable editing <
id
>, <
PRotocol
> and
<
baUd Rate
> submenu items.
IP PTZ cameras and others that transfers PTZ control signal
over IP network require no separate settings.
3.
To apply the change, click <
aPPly
> in the bottom of the screen.
Once clicked <
aPPly
> button after changing settings, a restarting message pops up. Click <
yes
> to restart the system
automatically.
4.
Once the setup is complete, press the [
exit
] button of the remote control or click <
cloSe
> button on the bottom to display
a confirmation dialog. Click <
cancel
> to return to the previous menu.
\
\
enabling Privacy Mask
For privacy purposes, you can specify masking area for a selected camera's video.
1.
From <
SySteM SetUP
> - <
caMeRa
>, select
<
PRivacy MaSk
>.
2.
Use [
▲▼◀▶
/enteR
] buttons of the remote or the
mouse to set channels enabled, mask color and its area.
i
ACTIVATION : Turns on or off the motion detection
sensor in the specified privacy area.
i
MASK COLOR : Select the color of the masked area,
which will be displayed on the monitor.
3.
To apply the change, click <
aPPly
> in the bottom of the
screen.
4.
When done, press the [
exit
] button on the remote control or click <
cloSe
> in the lower screen to return to the previous
menu.
Summary of Contents for 16CH
Page 1: ...4CH 8CH 16CH Full HD NVR User Manual ...
Page 145: ...English 145 Product Overview IPX HUB For 16channel NVR only 305 141 38 Appendix ...
Page 157: ......
Page 158: ......