Viavi SmartClass Fiber OLS-85 User Manual Download Page 79

Page: 79 / 94

OLS-85

OMMANDS

9 R

EMOTE

ONTROL

:IP:MASK?

Returns the IP mask which is currently valid for the instrument. In static

mode, this setup corresponds to IP:MASK:STAT; in DHCP mode, it is

provided by the DHCP server.
This setup is read-only.

:IP:MASK:STAT

<STRING>

Sets the static mode IP mask.

:IP:MASK:STAT?

Returns the static mode IP mask.

Response type:

<STRING>
See :IP:MASK:STAT command for more information.

:IP:MODE <NR1>

Selects if the IP address should be requested by DHCP or a static

address should be used.

Valid values:

0 (STATIC)
1 (DHCP)

Default:

:IP:MODE?

Returns whether the instrument is set to a static or dynamic IP address.

Response type:

<NR1>
See :IP:MODE command for more information.

:LANG <NR1>

Sets the user interface language.

Valid values:

0 (en_US)
1 (de_DE)
2 (fr_FR)
3 (es_ES)
4 (zh_CN)
5 (zh_TW)

Default:

:LANG?

Returns which user interface language is set.

Response type:

<NR1>
See :LANG command for more information.

:OPT:INST:BUSY?

Returns TRUE if an installation is in progress.

Response type:

Command string

Parameter type / Response type / Unit / Info

Summary of Contents for SmartClass Fiber OLS-85































































































Search results

Summary of Contents for SmartClass Fiber OLS-85

Reviews:

Related manuals for SmartClass Fiber OLS-85

Brands by name

Popular brands

Viavi SmartClass Fiber OLS-85, User Manual

Search results

Summary of Contents for SmartClass Fiber OLS-85

Reviews:

Related manuals for SmartClass Fiber OLS-85

Brands by name

Popular brands