OLS-85
27
C
ONFIGURING
THE
INSTRUMENT
4 B
ASIC
O
PERATION
The following table gives a short overview of the menu items.
These are explained in the sections below.
Changing the Auto-Off setting
√
The instrument is switched on.
1.
Press the
[
A
]
key and tap the
[
Settings
]
button.
2.
Tap the
[
Auto-Off
]
button.
The power mode menu opens.
3.
Select the desired setting to change the power mode.
Changing the Screen-Off setting
1.
Press the
[
A
]
key and tap the
[
Settings
]
button.
2.
Tap the
[
Screen-Off
]
button.
3.
Select the desired setting to change the screen off time.
Notes: Auto-Off
and
Screen-Off
settings are only active when
no external power supply is connected.
Auto-Off
To adjust the switch-off period of the instrument.
Screen-Off
To adjust the switch-off period of the screen.
Language
To select the language of the instrument texts.
Date & Time
To adjust the date, date format, time, and to set 24-hour time or 12-
hour time.
Date
To adjust the date.
Date Format
To adjust the date format.
Time
To adjust the time.
Time Format
To set 24-hour time or 12-hour time.
Network
To set the communications protocols.
IP Mode
To select either static or DHCP Ethernet mode.
IP Address
To set the IP-address in static Ethernet mode.
Gateway
To set the Gateway in static Ethernet mode.
Netmask
To set the Netmask in static Ethernet mode.
MAC Address
Unique identifier assigned to network interfaces for communication on
the physical network segment.
Remote Control Port
Shows the TCP port used for remote control via Ethernet.
Factory Reset
Set the instrument parameters and settings to their default values as
defined by Viavi. This does not affect any stored measurement results.
Manual
To show reference information and user assistance for the instrument.
Info
To show information about calibration, software, and hardware.
Summary of Contents for SmartClass Fiber OLS-85
Page 1: ...SmartClass Fiber OLS 85 User s Guide BN 2313 98 21 2016 01 English ...
Page 92: ...92 OLS 85 ROHS ...
Page 93: ......
