56
OLS-85
9 R
EMOTE
C
ONTROL
C
OMMUNICATION
INTERFACE
Fig. 20 Remote control block diagram
Selecting an application
In order to get to all available applications, to change the
currently selected application, and to get to the currently
selected application there is a set of application management
commands. The application management commands are a
subset of the Generic Commands and start with :APPM. The
application management acts as a switch routing the remote
control commands to the selected application. In order to
identify an application each application has a unique application
ID (<app_ID>) which will be used to set the switch.
For example send :APPM:SEL SYSTEM in order to select the
system application.
In addition to selection via the application management
commands, one can use a colon followed by the <app_ID> as a
prefix to the remote command.
For example, add the prefix :SYSTEM to any system application
command in order to communicate with the system application.
Notes:
Adding a prefix to a command has the same effect as
selecting an application via an application management
command. Hence, after using a prefix, the application
corresponding to that prefix is the selected application.
Summary of Contents for SmartClass Fiber OLS-85
Page 1: ...SmartClass Fiber OLS 85 User s Guide BN 2313 98 21 2016 01 English ...
Page 92: ...92 OLS 85 ROHS ...
Page 93: ......