Viavi SmartClass Fiber OLS-85, User Manual

Page: 76 / 94

76 OLS-85
9 R
EMOTE
C
ONTROL
C
OMMANDS
:SOUR:TONE <NR1> Sets the modulation frequency.
Notes: The selected value is written to the laser sources if
Auto
λ
is disabled.
Valid values:
0: CW
1: 270 Hz
2: 1 kHz
3: 2 kHz
Default:
0
:SOUR:TONE? Returns the currently selected modulation frequency.
:SOUR:WLEN:NUMB
?
Returns the number of available laser sources. The application is
capable of handling 4 laser sources. Some instruments may provide less
than 4 laser sources.
Response Type:
<NR1>
:SOUR:WLEN? Returns the wavelengths of all lasers sources.
:STOR:AVLB? Returns whether the application can or cannot store measurements.
Always TRUE for PowerMeter application.
:STOR:GRP:NAME
<STRING>
Sets the selected storage group name.
:STOR:GRP:NAME? Returns the name of the currently selected storage group.
Response Type:
<STRING>
See :STOR:GPR:NAME command for more information.
:STOR:GRP:NAMES? This setup contains the names of all available storage groups. The
“default” group is always available.
:STOR:NAMES? This setup contains the fiber IDs and internal IDs belonging to the
group specified by :STOR:GRP:NAME.
:STOR:NOTE
<STRING>
A user specific note which is stored with the measurement results.
:STOR:NOTE? Returns the stored user note.
Response Type:
<STRING>
See :STOR:NOTE command for more information.
Command string Parameter type / Response type / Unit / Info