Viavi Seeker X, User Manual

Page: 39 / 66

Seeker X User’s Guide
22137808, Rev. 001 Feb 2020 39
Chapter 2 Using Your Seeker X
Low battery
If the battery is getting low and needs to be recharged
soon, the Battery icon blinks constantly on all screens. An
example of a low battery warning while performing a level
measurements is shown here.
When the battery reaches a very low state and is about to
turn off, the Battery icon no longer blinks and stays on.
Firmware version
When you are in the battery charge level display, pressing the CHANGE button will
display the following information:
y
The Battery icon will continue to flash and the bar
graph will continue to indicate the relative battery
charge level.
y
The screen first displays the application firmware
version number.
y
After 5 seconds, the screen displays the FPGA firmware
version number.
y
Finally, the screen displays the package information.
NOTE:
The display will revert to the signal level display after a
few seconds in the firmware version display (without any
action by the user).
Low battery alert
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS
Application firmware
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS