Viavi Seeker X, User Manual

Page: 41 / 66

Seeker X User’s Guide
22137808, Rev. 001 Feb 2020 41
Chapter 2 Using Your Seeker X
NOTE:
The display will revert to the signal level display after a few
seconds in the peak hold display (without any action by the
user).
Peak hold disabled
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS
Peak hold enabled
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS
Enable/Disable peak hold
To enable/disable the Peak Hold function, turn your Seeker X on and press the SELECT
button repeatedly until the arrow appears under the PK icon , as shown here.
y
When the Peak Hold display is selected, pressing the
CHANGE
button will enable/
disable the Peak Hold function.
y
When this display is selected, the following will occur:
y
If the Peak Hold function is currently disabled, the
PK
icon flashes with the
arrow below the icon.
y
If the Peak Hold function is currently enabled, only
the arrow below the PK icon flashes.
y
When the Peak Hold function is enabled, the following will occur in the Signal Level
display:
y
The PK icon is constantly displayed at the top of the
screen.
y
The numerical display holds the latest peak RF level
reading for up to five seconds, unless the RF level
increases. This is useful if you are not able to look at
the display immediately or if you want to confirm
the highest level reading.
y
The peak element of the bar graph at the bottom
of the display also holds its peak indication for five
seconds, while the other elements of the bar graph
continue to indicate the signal strength of the live signal.