Seeker X User’s Guide
22137808, Rev. 001
Feb 2020
51
Chapter
2 Using Your Seeker X
Seeker MCA III display screens (optional)
GPS signal
When the Seeker X is placed in the Mobile Mount, the GPS icon is
used to display the status of the GPS Signal as follows:
y
When the GPS receiver is receiving a satellite signal, the
GPS
icon is on.
y
When the GPS receiver is not receiving a satellite signal,
the
GPS
icon flashes.
NOTE:
When the Mobile Mount is not connected to a Seeker MCA
III, the GPS icon is not shown on the display.
NOTE:
When the GPS receiver has been off or has not been able
to receive a satellite signal, for more than five minutes,
the device will beep twice every few seconds until the
condition is corrected.
NOTE:
When the GPS receiver IS NOT receiving a satellite signal,
the MCA III will not record leakage data from the Seeker.
GPS signal
SEEKER X
μV
m
dB
NOISE
FREQ
PK
DIST
GPS
Summary of Contents for Seeker X
