Viavi Seeker X, User Manual

Page: 17 / 66

Seeker X User’s Guide
22137808, Rev. 001 Feb 2020 17
About this Guide
What ships with the Seeker X?
When you unpack the Seeker X, the following items are included as standard.
y
Seeker X Leakage Detector
y
Battery (installed in the unit)
y
AC to DC Power Adapter & Battery Charger with USB Charge/Data Cable
y
Quick Start Guide (a multi-fold guide that fits easily in the carrying case)
y
Safety information sheet
Optional kits
y
Walk out – Adds the directional handheld antennas (WFS-1, WFS-2), near field probe
(NFP-1), car charger, and carrying case
y
Drive out – Adds the Mobile Mount, diplexer (DPF-1), and vehicle antennas (AVM-3,
WVM-2)
y
Mapping – Adds a Seeker MCA III, and GPS receiver
Preparation for use
This section explains how to start using the Seeker X. When you unpack your instrument, do
the following:
y
Inspect the unit for damage. If the instrument is damaged, put it back in the box and
contact VIAVI customer service (see “Technical Assistance” on page 11 ).
y
If undamaged, save the box and packing materials in case you need to ship the
instrument in the future.
y
Remove the protective film from the LCD. This film is in place to protect the LCD during
shipment. Use the tab in the lower right corner to easily remove the film.
Before using the Seeker X for the first time, do the following:
y
Turn on the unit and verify it is operating properly by navigating through a few menus.
y
If the LO appears on the display, charge the battery.
NOTE:
For additonal information about Seeker X options and
services, contact your local VIAVI representative or visit
www.viavisolutions.com.