Viavi Seeker X, User Manual

Page: 36 / 66

Seeker X User’s Guide
22137808, Rev. 001 Feb 2020 36
Chapter 2 Using Your Seeker X
The screen to the right indicates detected leakage values of 174
µV/m on the frequency the user has selected to show at the top;
and 23 µV/m on the frequency the user has selected to show on
the bottom.
The bar graph at the bottom of the screen displays the relative
signal level of the detected signal.
Additionally, the tag icon is displayed in the upper right corner of
the display to indicate the leakage detector is receiving at least
one tagged signal from the CT-X.
If the tag icon is not displayed along with the signal level, the
show noise setting is turned on. In this mode, the signal levels
that are displayed will also include non-tagged noise that is
received by the leakage detector.
Tagged signal detected
(high frequency)
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS
Untagged signal detected
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS